B Before Mixing product, reserve some dry Textured Solutions for future repairs, instead of having to store wet mixture in your freezer.  If dry Textured Solutions is not stored, reserve some west mixture in freezer for repairs.

B Apply Textured Solutions at any temperature above 50 degree Fahrenheit

B The more defects the Textured Solutions has to fill, the least amount of square footage you will achieve. To achieve maximum square footage, fill grooves or defects with Shrink Proof Joint Compound, and allow to cure.  Then follow application instructions.

B If you unexpectedly have to stop applying Textured Solutions or you run out of Textured Solutions, finish your surface to corner or edge. Do not stop in the middle of your wall.  This make starting up less time consuming.

When resuming your installation, saturate the last 12” of Textured Solutions, where you left off, back to the original consistency.  Then begin applying your new mixture (left over and new mixture).  If you see a seam, you have not added enough water to the area you left off at.

B For added protection, you may spray your dry, finished walls with a fabric protector to further enhance Textured Solutions own stain resistance.  Example: Scotch Guard.

B If you’re interested in a clear protector for sealing our products, we recommend using:  Clear Protector by Duramax.  The above sealers are sold in the following shines:  Flat:  looks like original Textured Solutions; Satin:  slight shine to Textured Solutions: Gloss: makes Textured Solutions look like plastic.  The repairability and re-usability features will be lost.

B To clean, lightly mist slightly soiled areas with a mild, nonabrasive (non-colored) detergent and wipe with a damp cloth.  You can even vacuum it clean.  If mud that is wet gets on Textured Solutions, wait until mud is dry before you try to clean.  DO NOT USE PRODUCTS WITH BLEACH, they will strip color.

B  If you walls get nicked or scarred or if an area becomes extremely dirty, saturate the damaged area with water until Textured Solutions is back to its original consistency.  When the Textured Solutions is pliable and the material moves with your finger, simply scrape it off.

In small areas:  you can then blend Textured Solutions from the surrounding area into the scarred area.

 For larger areas, saturate surrounding area until material softens.  Apply leftover Textured Solutions, blending and feathering the edges to avoid a patched look

B To customize, you may mix two or more Textured Solutions styles together, or add your own thead, yarn, or glitter to the mixture and then allow items to set the recommended time.

B Apply wallpaper and wallpaper borders after the primer/sealer and before       applying Textured Solutions

If you have any questions or encounter problems while applying Textured Solutions, please call us toll free at 1-(877) 654-7998 or email us at textured.solutions@verizon.net.  If you would like additional colors, see our web site at www.texturedsolutions.com .

We ship via  

Lower Burrell, PA 15068